Rosemount 644 Temperature Transmitter
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Rosemount 644 Temperature Transmitter
Feature :
1. Attach the thermowell to the pipe or process container wall. Install and tighten thermowells before applying process pressure.
2. Attach necessary extension nipples and adapters to the thermowell.Seal the nipple and adapter threads with silicone tape.
3. Screw the sensor into the thermowell. Install drain seals if required for severe environments or to satisfy code requirements.
4. Pull the sensor wiring leads through the universal head and transmitter. Mount the transmitter in the universal head by threading the transmitter mounting screws into the universal head mounting holes.
5. Mount the transmitter-sensor assembly into the thermowell. Seal adapter threads with silicone tape.
6. Install a cable gland or conduit for field wiring to the conduit entry ofthe universal head. Seal threads with silicone tape.
7. Pull the field wiring leads through the conduit into the universal head.Attach the sensor and power leads to the transmitter. Avoid contactwith other terminals.
8. Install and tighten the universal head cover. Enclosure covers mustbe fully engaged to meet explosion-proof requirements.
Specifications :
LCD Display Installation
The LCD display provides local indication of the transmitter output and
abbreviated diagnostic messages governing transmitter operation.
Transmitters ordered with the LCD display are shipped with the meter
installed. After-market installation requires the meter kit (part number00644-4430-0001), which includes:
• LCD display assembly (includes LCD display, meter spacer,and 2 screws)
• Meter cover with O-ring in place
The transmitters will accept inputs from a variety of RTD and thermocouple types. Refer to Figure 4-1 when making sensor connections. Refer to Figure 4-2 for Profibus installations.Use the following steps to wire the power and sensor to the transmitter:
1. Connect the positive power lead to the .+. terminal. Connect the negative power lead to the .-. terminal.
2. Tighten the terminal screws. When tightening the sensor and power wires, the max torque is 6-in.-lbs (0.7 N-m).
3. Apply power.
Teachnical parameters :
Products show :
Why chose us :
- Smart Pressure Transmitter Advantages 1 Pieces / (Min. Order)
- 475 Hart Communicator 1 Pieces / (Min. Order)
- 475 Hart Communicator-Rosemount 1 Pieces / (Min. Order)
- 475 Hart Communicator - Emerson 1 Pieces / (Min. Order)
- Rosemount 475 Field Communicator 1 Pieces / (Min. Order)
- Rosemount 475 Hart Communicator 15 Pieces / (Min. Order)
- Rosemount 475 Feild Communicator 15 Pieces / (Min. Order)
- EJX510A EJX530A Absolute And Gauge Pressure Transmitter 15 Pieces / (Min. Order)
- EJX110A Differential Pressure Transmitter 15 Pieces / (Min. Order)
- Rosemount 1151 Pressure Transmitter 15 Pieces / (Min. Order)
- EJA130A Differential Pressure Transmitter 15 Pieces / (Min. Order)
- EJA118N Differential Pressure Transmitter 15 Pieces / (Min. Order)
- EJA118W Diaphragm SeaLED Differential Pressure Transmitters 15 Pieces / (Min. Order)
- EJA110A Differential Pressure Transmitter 15 Pieces / (Min. Order)
- UE Temperature Transmitter With Switch 15 Pieces / (Min. Order)
- UE J21K Differential Pressure Switch 15 Pieces / (Min. Order)
- J6 UE Pressure And Vacuum Switches 15 Pieces / (Min. Order)
- J400 UE Temperature Switch 15 Pieces / (Min. Order)
- 117 Series UE Pressure Switch 15 Pieces / (Min. Order)